configure esrp election-policy
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
1259
Example
The following command configures the election algorithm to use tracking information as the first
criteria for determining the ESRP master switch for ESRP domain
esrp1:
configure esrp esrp1 election-policy track > ports > priority > mac
History
This command was first available in ExtremeWare XOS 11.0.
The default election algorithm for extended mode was updated to
sticky > ports > weight >
track > priority > mac
, and the weight election factor was used in ExtremeWare XOS 11.1. The
sticky > ports > track > priority > mac > weight election algorithm is not supported in
ExtremeWare XOS 11.1.
Platform Availability
This command is available on all platforms.
To Next Page
Loading...