configure snmpv3 add group user
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
137
The following command associates the user userv3 with security model USM and storage type volatile
to the access group defaultRoGroup:
configure snmpv3 add group defaultRoGroup user userV3 volatile
History
This command was first available in ExtremeWare XOS 10.1.
The
hex_group_name and hex_user_name parameters were added in ExtremeWare XOS 11.0.
Platform Availability
This command is available on all platforms.
To Next Page
Loading...