configure snmpv3 add mib-view
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
139
The following command creates a view vrrpTrapNewMaster which excludes VRRP notification .1 and the
entry is volatile:
configure snmpv3 add mib-view vrrpTrapNewMaster 1.3.6.1.2.1.68.0.1/ff8 type excluded
volatile
History
This command was first available in ExtremeWare XOS 10.1.
The
hex_view_name parameter was added in ExtremeWare XOS 11.0.
Platform Availability
This command is available on all platforms.
To Next Page
Loading...