Commands for Managing the Switch
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
144
Example
The following command specifies a target parameters entry named P1, a user name of guest, message
processing and security model of SNMPv2c, and a security level of no authentication:
configure snmpv3 add target-params P1 user guest mp-model snmpv2c sec-model snmpv2c
sec-level noauth
History
This command was first available in ExtremeWare XOS 10.1.
The
hex_param_name and hex_user_name parameters were added in ExtremeWare XOS 11.0.
Platform Availability
This command is available on all platforms.
To Next Page
Loading...