RIPng Commands
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
1512
Example
The following command configures the VLAN backbone to accept routes from its neighbor as specified
by the policy nosales:
configure ripng vlan backbone route-policy in nosales
The following command uses the policy nosales to determine which RIP routes are advertised into the
VLAN backbone:
configure rip vlan backbone route-policy out nosales
History
This command was first available in ExtremeWare XOS 11.2.
Platform Availability
This command is available on all platforms.
To Next Page
Loading...