Commands for Managing the Switch
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
154
Example
The following command deletes the user guest from the group UserGroup for the security model
snmpv2c:
configure snmpv3 delete group UserGroup user guest sec-model snmpv2c
The following command deletes the user guest from the group userGroup with the security model USM:
configure snmpv3 delete group userGroup user guest
History
This command was first available in ExtremeWare XOS 10.1.
The
hex_group_name and the hex_user_name parameters were added in ExtremeWare XOS 11.0.
Platform Availability
This command is available on all platforms.
To Next Page
Loading...