configure ospfv3 add interface
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
1609
NOTE
Configuration of the link-type parameter is not supported. OSPFv3 will always consider the link-type to be broadcast.
Example
The following command adds the VLAN accounting (enabling OSPFv3 on the interface), to the area
0.0.0.1 with an instance ID of 2:
configure ospfv3 add vlan accounting instance-id 2 area 0.0.0.1 link-type auto
History
This command was first available in ExtremeWare XOS 11.2.
Platform Availability
This command is available on platforms with a Core or an Advanced Core license.
To Next Page
Loading...