OSPFv3 Commands
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
1656
You can filter the display using either the area ID, the remote router ID, or the link-state ID. The default
setting is
all.
Example
The following command displays all areas and all types in a summary format:
show ospfv3 lsdb stats
History
This command was first available in ExtremeWare XOS 11.2.
Platform Availability
This command is available on platforms with a Core or an Advanced Core license.
To Next Page
Loading...