Commands for Managing the Switch
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
168
Example
This example assumes that you already created an ACL to apply to Telnet.
The following command applies the ACL MyAccessProfile_2 to Telnet:
configure telnet access-profile MyAccessProfile_2
History
This command was first available in ExtremeWare XOS 11.2.
Platform Availability
This command is available on all platforms.
To Next Page
Loading...