configure bgp peer-group dampening
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
1709
Use the following command to disable route flap dampening for a BGP peer-group:
configure bgp peer-group <peer-group-name> no-dampening
Example
The following command configures route flap dampening for the BGP peer group outer:
configure bgp peer-group outer dampening
History
This command was first available in ExtremeWare XOS 10.1.
This command required an Advanced Core license in ExtremeWare XOS 11.1.
Platform Availability
This command is available on platforms with a Core or an Advanced Core license.
To Next Page
Loading...