enable snmp access
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
181
* change your SNMP public and private strings
* consider using SNMPv3 to secure network management traffic
In addition, you can return to safe defaults mode by issuing the following commands:
● unconfigure switch all
● configure safe-default-script
If you return to safe defaults mode, you must answer the questions presented during the interactive
script.
For more detailed information about safe defaults mode, see “Safe Defaults Setup Method” on page 51
in the ExtremeWare XOS Concepts Guide.
Example
The following command enables all SNMP access for the switch:
enable snmp access
History
This command was first available in ExtremeWare XOS 10.1.
Platform Availability
This command is available on all platforms.
To Next Page
Loading...