Configuration and Image Commands
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
1896
(R) holes on the BlackDiamond 8800 MSM and applying pressure. For more information, please refer to
the Extreme Networks Consolidated XOS Hardware Installation Guide.
Example
The following command automatically upgrades the firmware when a newer firmware image is present
without prompting you to confirm the upgrade:
configure firmware auto-install
History
This command was first available in ExtremeWare XOS 11.1.
Platform Availability
This command is available only on the BlackDiamond 8800 series switch.
To Next Page
Loading...