show cna-testplug
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
2001
● Listening ports
■ Test requests(from ANS)—Number of tests that the CNA Agent was requested to run by the
Adaptive Networking Software (ANS) on the CNA Server
■ RTP test requests(from test plugs)—Number of RTP streams that the CNA Agent initiates
■ RTP and Traceroute responses(from test plugs)—Number of responses by the CNA Agent to
requests for RTP and Traceroute tests
● Last Test—Last test that CNA Agent performed
● Result Last Test—Results of the last test, which the CNA Agent sends to the CNA Server
● Test—Tests run by the CNA Agent
● Count—Number of tests successfully run
Example
The following command displays CNA Agent statistics and connection status on the BlackDiamond
10808 switch:
show cna-testplug
HW Name: BlackDiamond 10808
Firmware Version: 11.3.0.4
Interface VLAN: "Default" on Virtual router "VR-Default"
IP address of the Interface: 10.203.135.61
CNA Testplug version: 3.0.1
Interface version with Scheduler:17
Admin: Enabled
Status: Registered
Errors: 29846
Total tests received: 58338
Scheduler (SBC): 10.203.128.123: 20000:
Listening ports
--Test requests(from ANS): 50000
--RTP test requests(from test plugs): 50001
--RTP and Traceroute responses(from test plugs): 50015
Last Test: Ping to 10.203.135.61
Result Last Test: ping results: rtt: 2.292000, loss: 0.000000
Results:
TEST COUNT FAILED
---- ------ ------
Traceroute 65489 0
RTP 51403 0
Ping 101549 0
Tcpconnect 36455 0
Merge 50 0
The following command displays CNA Agent statistics and connection status on the Summit X450
series switch:
show cna
HW Name: SummitX450-24t
Firmware version: 11.3.0.11
Interface VLAN: "Default" on Virtual router "VR-Default"
IP address of the Interface: 10.203.128.126
To Next Page
Loading...