restart process
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
269
software upgrade, enter restart process followed by [Tab]. The switch displays a list of available
processes.
To display the status of ExtremeWare XOS processes on the switch, including how many times a process
has been restarted, use the
show process {<name>} {detail} {description} {slot <slotid>}
command. The following is a truncated sample of the show process command on the Summit X450
series switch:
Process Name Version Restart State Start Time
-------------------------------------------------------------------------
aaa 3.0.0.2 0 Ready Thu Sep 1 17:00:52 2005
acl 3.0.0.2 0 Ready Thu Sep 1 17:00:54 2005
bgp Not Started 0 No license Not Started
cfgmgr 3.0.0.21 0 Ready Thu Sep 1 17:00:52 2005
cli 3.0.0.22 0 Ready Thu Sep 1 17:00:52 2005
devmgr 3.0.0.2 0 Ready Thu Sep 1 17:00:52 2005
dirser 3.0.0.2 0 Ready Thu Sep 1 17:00:51 2005
dosprotect 3.0.0.1 0 Ready Thu Sep 1 17:00:56 2005
eaps 3.0.0.8 0 Ready Thu Sep 1 17:00:53 2005
...
You can also use the restart process command when upgrading a software modular package. For
more information, see the section “Upgrading a Modular Software Package” in Appendix A, “Software
Upgrade and Boot Options,” of the ExtremeWare XOS Concepts Guide.
Example
The following command stops and restarts the process tftpd during a software upgrade:
restart process tftpd
The following command stops and restarts all instances of the OSPF routing protocol for all VRs during
a software upgrade:
restart process class ospf
History
This command was first available in ExtremeWare XOS 11.3.
Support for the Border Gateway Protocol (bgp) was added in ExtremeWare XOS 11.4.
Platform Availability
This command is available on all platforms.
To Next Page
Loading...