configure cfm domain association end-point transmit-interval
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
431
Example
The following command changes the interval the inward-facing MEP (previously configured on port
2:4) uses to send CCM messages on the 350 association in the finance domain to 2 seconds:
configure cfm domain finance association 350 ports 2:4 end-point inward-facing
transmit-interval 2000
History
This command was first available in ExtremeWare XOS 11.4.
Platform Availability
This command is available only on the BlackDiamond 10808 and 12804 switches.
To Next Page
Loading...