Commands for Configuring LLDP
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
464
If you configure the TLV to advertise auto, the phone cycles through the following sequence until an
action is successful:
● Uses the configuration advertised by the LLDP MED network policy TLV, as configured by the
configure lldp ports vendor-specific med policy application command.
● Uses the priority tagged frames configured by the phone’s server.
● Sends the traffic untagged.
Example
The following command configures al ports to advertise the dot1q framing as untagged to neighbors:
configure lldp ports all advertise vendor-specific avaya-extreme dot1q-framing
untagged
History
This command was first available in ExtremeWare XOS 11.5.
Platform Availability
This command is available on all platforms.
To Next Page
Loading...