configure lldp ports vendor-specific dot3 power-via-mdi
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
477
NOTE
For more information on advertising power support, see the configure lldp ports vendor-specific med
power-via-mdi command.
Example
The following command configures all ports to advertise power capabilities to neighbors:
configure lldp ports all advertise vendor-specific dot3 power-via-mdi
History
This command was first available in ExtremeWare XOS 11.2.
Platform Availability
This command is available on all platforms.
To Next Page
Loading...