Commands for Configuring LLDP
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
486
● Power priority
Taken from PoE port configuration.
● Power value
Taken from PoE port configuration.
Example
The following command configures all ports to advertise MED power information to neighbors:
configure lldp ports all advertise vendor-specific med power-via-mdi
History
This command was first available in ExtremeWare XOS 11.5.
Platform Availability
This command is available on all platforms.
To Next Page
Loading...