Commands for Status Monitoring and Statistics
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
592
If you do not configure a source IP address for the syslog target, the switch uses the IP address in the
configured VR that has the closed route to the destination.
Example
The following command configures the IP address for the specified syslog target named orange:
configure log target syslog orange from 10.234.56.78
History
This command was first available in ExtremeWare XOS 10.1.
Platform Availability
This command is available on all platforms.
To Next Page
Loading...