Commands for Status Monitoring and Statistics
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
638
Example
On the BlackDiamond 10808 and the BlackDiamond 12804 switches, the following example assumes
that you did not modify the
interval option in the configure sys-health-check interval
<interval>
command.
The following command disables backplane diagnostic packets on slot 3 and returns the polling
frequency on slot 3 to 60 seconds:
disable sys-health-check slot 3
On the BlackDiamond 8800 series switch, the following example assumes that you did not modify the
interval option in the configure sys-health-check interval <interval> command.
The following command disables backplane diagnostics on slot 3, polling is always enabled and occurs
every 5 seconds.
disable sys-health-check slot 3
History
This command was first available in ExtremeWare XOS 10.1.
Platform Availability
This command is available only on modular switches.
To Next Page
Loading...