Commands for Status Monitoring and Statistics
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
652
Example
The following command enables sFlow sampling globally:
enable sflow
If you enable sFlow globally on the Summit X450 series switch or the BlackDiamond 8800 original
modules, the switch displays a message similar to the following:
SFLOW will use Qos Profile QP2.
History
This command was first available in ExtremeWare XOS 11.0.
Platform Availability
This command is available on all platforms with an Advanced Edge, a Core, or an Advanced Core
license.
To Next Page
Loading...