show ports rxerrors
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
689
9 R 0 0 0 0 0 0 0
10 R 0 0 0 0 0 0 0
11 R 0 0 0 0 0 0 0
12 R 0 0 0 0 0 0 0
13 R 0 0 0 0 0 0 0
14 R 0 0 0 0 0 0 0
15 R 0 0 0 0 0 0 0
16 R 0 0 0 0 0 0 0
17 R 0 0 0 0 0 0 0
================================================================================
Link Status : A-Active, R-Ready, NP-Port Not Present
0->Clear Counters U->page up D->page down ESC->exit
History
This command was first available in ExtremeWare XOS 10.1.
The link status information was updated to include
NP-Port not present in ExtremeWare XOS 11.2.
Support for the auto-refresh functionality and the
no-refresh parameter were added in ExtremeWare
XOS 11.3. Auto-refresh continually updates the display. The
no-refresh parameter takes a real-time
snapshot of the display at the time you issue the command.
Platform Availability
This command is available on all platforms.
To Next Page
Loading...