Commands for Accessing the Switch
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
72
From here, you have four command choices:
● Login—Use this command to access the switch CLI. You will have full administrator capabilities.
● Reboot—Use this command to reboot the current MSM (on modular switches).
● Help—Use this command to display a short help text.
● Exit—Use this command to exit the failsafe account and return to the login prompt.
Typically, you would use the
Login command to correct the problem that required you to use the
failsafe account.
Example
The following command defines a failsafe account:
configure failsafe-account
History
This command was first available in ExtremeWare XOS 11.0.
Platform Availability
This command is available on all platforms.
To Next Page
Loading...