configure meter
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
873
Example
The following command configures the ACL meter maximum_bandwidth, assigns it a rate of 10 Mbps,
and sets the out of profile action to
drop:
configure meter maximum_bandwidth committed-rate 10 Mbps out-action drop
History
This command was available in ExtremeWare XOS 11.1.
Platform Availability
This command is available only on the BlackDiamond 8800 series switch and the Summit X450 family of
switches.
To Next Page
Loading...