configure ports rate-limit map cos high
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
883
Example
The following command sets the high queue to a CoS value of 6 on the ingressing packet on ports 4:2 to
4:10 (the other values follow in cascading order):
configure ports 4:2-10 rate-limit map cos high 6
History
This command was first available in ExtremeWare XOS 11.4.
Platform Availability
The command is available only on the BlackDiamond 12804 R-Series switch.
To Next Page
Loading...