QoS Commands
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
894
Example
The following command associates the egress queue tqe with the ingress queue tqs and adds all ports
for egress for that association:
configure traffic ingress queue tqs add egress queue tqe ports 2:1
History
This command was first available in ExtremeWare XOS 11.4.
Platform Availability
This command is available only on the BlackDiamond 12804 R-Series switch.
To Next Page
Loading...