show traffic queue utilization
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
939
The following is an example of the output of this command:
Traffic Priority Levels
Queue Name D H M L
--------------- - --- --- ---
tq2 I 22 15 44
tq3 I 5 7 238
I=Ingress, E=Egress
The following command displays HQoS utilization for the specified traffic queue:
show traffic queue tq2 utilization
The following is an example of the output of this command:
Traffic Priority Levels
Queue Name D H M L
--------------- - --- --- ---
tq2 I 0 0 105
I=Ingress, E=Egress
History
This command was first available in ExtremeWare XOS 11.4.
Platform Availability
This command is available only on the BlackDiamond 12804 R-Series switch.
To Next Page
Loading...