unconfigure qosprofile
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
943
Default
Default values differ by platform.
BlackDiamond 8800 series switch and Summit X450 family of switches only. The default values for the two
default egressing QoS profiles (QP1 and QP8) on the BlackDiamond 8800 series switch and the Summit
X450 family of switches are shown in this section; the BlackDiamond 8800 series switch and the Summit
X450 family of switches do not support ingressing QoS profiles.
● Weight—1
● Maximum buffer—100%
For the BlackDiamond 8800 a-series and e-series modules and the Summit X450a and X450e series
switches, this command also resets the minimum bandwidth to 0% and the maximum bandwidth to
100% for the specified egressing
BlackDiamond 10808 and 12804 switch only. the default values for egressing QoS profiles on the
BlackDiamond 10808 and 12804 switch are shown in this section:
● QP1 - 1, Low
● QP2 - 2, LowHi
● QP3 - 3, Normal
● QP4 - 4, NormalHi
● QP5 - 5, Medium
● QP6 - 6, MediumHi
● QP7 - 7, High
● QP8 - 8, HighHi (highest priority)
BlackDiamond 10808 switch only. the default values for ingressing QoS profiles on the BlackDiamond
10808 switch are shown in this section.
Ingress QoS is disabled by default.
● Minimum bandwidth—0%
● Maximum bandwidth—100%
● Minimum committed and peak rates—1 Kbps
● Maximum committed and peak rates—varies by I/O module:
■ 1G I/O module—1,000 Mbps
■ 10G I/O module—10,000 Mbps
● Ingress priority—By default, each QoS profile is assigned a different priority level, which varies by
I/O module:
■ 1G I/O module:
■ IQP1 - 1 Low
■ IQP2 - 1, LowHi
■ 10G I/O module:
■ IQP1 - 1, Low
■ IQP2 - 2, LowHi
■ IQP3 - 3, Normal
■ IQP4 - 4, NormalHi
To Next Page
Loading...