UCM630X Series User Manual
Version 1.0.11.10
• NACK
• NACK+RTX(SSRC-GROUP)
• OFF
Check to enable Forward Error Correction (FEC) for Video.
Check to enable Forward Error Correction (FEC) for Audio.
Access Control List manages the IP addresses that can register to this extension.
• Allow All: Any IP address can register to this extension.
• Local Network: Only IP addresses in the configured network segments can
register to this extension. Press “Add Local Network Address” to add more IP
segments.
Select the jitter buffer method.
• Disable: Jitter buffer will not be used.
• Fixed: Jitter buffer with a fixed size (equal to the value of "jitter buffer size")
• Adaptive: Jitter buffer with an adaptive size (no more than the value of
"max jitter buffer").
• NetEQ: Dynamic jitter buffer via NetEQ.
Configure the codecs to be used.
Select which presence status to set for the extension and configure call forward
conditions for each status. Six possible options are possible: “Available”, “Away”,
“Chat”, “Custom”, “DND” and “Unavailable”. More details at [PRESENCE].
To Next Page
Loading...
Need help?
General
