To Next Page

To Previous Page

P a g e | 206

UCM630X Series User Manual

Version 1.0.11.10

DND Whitelist

If DND is enabled, calls from the whitelisted numbers will not be rejected. Multiple

numbers are supported and must be separated by new lines. Pattern matching is

supported.

• Z matches any digit from 1-9

• N matches any digit from 2-9

• X matches any digit from 0-9.

FWD Whitelist

Calls from users in the forward whitelist will not be forwarded. Pattern matching is

supported.

• Z matches any digit from 1-9

• N matches any digit from 2-9

• X matches any digit from 0-9.

CC Settings

Enable CC

If enabled, UCM630X will automatically alert this extension when a called party is

available, given that a previous call to that party failed for some reason. By default, it

is disabled.

CC Mode

Two modes for Call Completion are supported:

• Normal: This extension is used as an ordinary extension.

• For Trunk: This extension is registered from a PBX.

The default setting is “Normal”.

CC Max Agents

Configure the maximum number of CCSS agents which may be allocated for this

channel. In other words, this number serves as the maximum number of CC requests

this channel can make. The minimum value is 1.

CC Max Monitors

Configure the maximum number of monitor structures that may be created for this

device. In other words, this number tells how many callers may request CC services

for a specific device at one time. The minimum value is 1.

Ring Simultaneously

Grandstream Networks UCM630X Series User Manual

Other manuals for Grandstream Networks UCM630X Series