Grandstream Networks UCM630X Series User Manual

P a g e | 207
UCM630X Series User Manual
Version 1.0.11.10
Ring
Simultaneously
Enable this option to have an external number ring simultaneously along with the
extension. If a register trunk is used for outbound, the register number will be used to
be displayed for the external number as the caller ID number.
External Number
Set the external number to ring simultaneously. ‘-’ is the connection character that will
be ignored.
This field accepts only letters, numbers, and special characters + = * #.
Time Condition for
Ring
Simultaneously
Ring the external number simultaneously along with the extension based on this time
condition.
Use callee DOD on
FWD or RS
Use the DOD number when calls are being diverted/forwarded to external
destinations or when ring simultaneous is configured.
Monitor privilege control
Allowed to
call-barging
Add members from “Available Extensions” to “Selected Extensions” so that the
selected extensions can spy on the used extension using feature code.
Seamless transfer privilege control
Allowed to
seamless transfer
Any extensions on the UCM can perform a seamless transfer. When using the Pickup
Incall feature, only extensions available on the “Selected Extensions” list can perform
a seamless transfer to the edited extension.
Other Settings
Ring Timeout
Configure the number of seconds to ring the user before the call is forwarded to
voicemail (voicemail is enabled) or hang up (voicemail is disabled). If not specified,
the default ring timeout is 60 seconds on the UCM630X, which can be configured in
the global ring timeout setting under Web GUI → PBX Settings → Voice Prompt →
Custom Prompt: General Preference. The valid range is between 3 seconds and 600
seconds.
Note: If the endpoint also has a ring timeout configured, the actual ring timeout used
is the shortest time set by either device.

Grandstream Networks UCM630X Series Specifications

General

Brand	Grandstream Networks
Model	UCM630X Series
Category	Conference System
Language	English