UCM630X Series User Manual
Version 1.0.11.10
Configure the name of the IVR. Letters, digits, _ and - are allowed.
Enter the extension number for users to access the IVR.
If enabled, all callers to the IVR can use trunk. The permission must be configured
for the users to use the trunk first. The default setting is "No".
If enabled, calls to this IVR will automatically be recorded.
Assign permission level for outbound calls if "Dial Trunk" is enabled. The available
permissions are "Internal", "Local", "National" and "International" from the lowest
level to the highest level.
The default setting is "Internal". If the user tries to dial outbound calls after dialing
into the IVR, the UCM630X will compared the IVR's permission level with the
outbound route's privilege level.
If the IVR's permission level is higher than (or equal to) the outbound route's
privilege level, the call will be allowed to go through.
This controls the destination that can be reached by the external caller via the
inbound route. The available destinations are:
• Extension
• Conference
• Call Queue
• Ring Group
• Paging/Intercom Groups
• Voicemail Groups
• Dial by Name
• All
If enabled only numbers inside of the Whitelist or outside of the Blacklist can be
called from IVR.
To Next Page
Loading...
Need help?
General
