Grandstream Networks UCM630X Series - Voicemail Access Code

P a g e | 417
UCM630X Series User Manual
Version 1.0.11.10
Call Forward Unconditional
Deactivate
• Default Code: *73
Remote Call Forward Enable
Enable this option and configure the Remote Call Forward Whitelist
below to allow specific extensions to dial the remote call forwarding
feature codes to set call forwarding for any extension.
Feature Codes
Voicemail Access Code
• Default Code: *98
• Enter *98 and follow the voice prompt. Or dial *98 followed by
the extension and # to access the entered extension's voicemail
box.
My Voicemai
• Default Code: *97
• Press *97 to access the voicemail box.
Agent Pause
• Default Code: *83
• Pause the agent in all call queues.
Agent Unpause
• Default Code: *84
• Unpause the agent in all call queues.
Paging Prefix
• Default Code: *81
• To page an extension, enter the code followed by the extension
number.
Intercom Prefix
• Default Code: *80
• To intercom an extension, enter the code followed by the
extension number.
Blacklist Add
• Default Code: *40
• To add a number to blacklist for inbound route, dial *40 and
follow the voice prompt to enter the number.
Blacklist Remove
• Default Code: *41
• To remove a number from current blacklist for inbound route,