UCM630X Series User Manual
Version 1.0.11.10
0000, 1111, 1234, 2345, and etc.), or common digits pattern (such as
111222, 321321 and etc.) are not allowed to be configured as password.
2. Password for extension registration, Web GUI admin login, LDAP and
LDAP sync requires alphanumeric characters containing at least two
categories of the following, with a minimum length of 4 characters.
• Numeric digits
• Lowercase alphabet characters
• Uppercase alphabet characters
• Special characters
If enabled, random password will be generated when the extension is
created. The default setting is "Yes". It is recommended to enable it for
security purpose.
Enable Auto E-mail To User
If enabled, UCM630X will send Email notification to user automatically after
editing extension settings or adding a new extension.
If set to "Yes", users could disable the extension range pre-
configured/configured on the UCM630X. The default setting is "No".
Note: It is recommended to keep the system assignment to avoid
inappropriate usage and unnecessary issues.
The default extension range assignment is:
• User Extensions: 1000-6299
User Extensions is referring to the extensions created under Web
GUI→Extension/Trunk→Extensions page.
• Pick Extensions: 4000-4999
This refers to the extensions that can be manually picked from end
device when being provisioned by the UCM630X. There are two related
To Next Page
Loading...
Need help?
General
