Grandstream Networks UCM630X Series - Page 532

P a g e | 532
UCM630X Series User Manual
Version 1.0.11.10
• Source channel
• Dest channel
• Call status
• Dest channel extension
• Last app
• Last data
• AMAFLAGS
• UIQUEID
• Call type
• NAT
Account Code
Select the account Code to filter with. If pin group CDR is enabled, the call with pin
group information will be displayed as part of the CDR under Account Code Field.
Start Time
Specify the start time to filter the CDR report. Click on the calendar icon on the right
and the calendar will show for users to select the exact date and time.
End Time
Specify the end time to filter the CDR report. Click on the calendar icon on the right
and the calendar will show for users to select the exact date and time.
Caller Number
Enter the caller number to filter the CDR report. CDR with the matching caller number
will be filtered out.
User could specify a particular caller number or enter a pattern. ‘.’ matches zero or
more characters, only appears in the end. ‘X’ matches any digit from 0 to 9, case-
insensitive, repeatable, only appears in the end.
For example:
3XXX: It will filter out CDR that having caller number with leading digit 3 and of 4 digits’
length.
3.: It will filter out CDR that having caller number with leading digit 3 and of any length.
Caller Name
Enter the caller name to filter the CDR report. CDR with the matching caller name will
be filtered out.