Configure System Information
82
M4300 Series and M4300-96X Fully Managed Switches User Manual
The following table displays Summary information.
Table 26. SDM Template Preference Summary
Field Description
SDM Current Template ID The current active SDM template. Possible values are as follows:
• IPv4 Data Center Plus Generic
• IPv4 Data Center Plus Native
• IPv4 Data Center Plus Mixed Native and M4300-96X
• IPv4 Data Center Plus M4300-96X
• Dual IPv4 and IPv6 Data Center Generic
• Dual IPv4 and IPv6 Data Center Native
• Dual IPv4 and IPv6 Data Center Plus Mixed Native and M4300-96X
• Dual IPv4 and IPv6 Data Center M4300-96X
SDM Template Identifies the template. The possible values are as follows:
• IPv4 Data Center Plus Generic
• IPv4 Data Center Plus Native
• IPv4 Data Center Plus Mixed Native and M4300-96X
• IPv4 Data Center Plus M4300-96X
• Dual IPv4 and IPv6 Data Center Generic
• Dual IPv4 and IPv6 Data Center Native
• Dual IPv4 and IPv6 Data Center Plus Mixed Native and M4300-96X
• Dual IPv4 and IPv6 Data Center M4300-96X
ARP Entries The maximum number of entries in the IPv4 Address Resolution Protocol (ARP)
cache for routing interfaces.
IPv4 Unicast Routes The maximum number of IPv4 unicast forwarding table entries.
IPv6 NDP Entries The maximum number of IPv6 Neighbor Discovery Protocol (NDP) cache entries.
IPv6 Unicast Routes The maximum number of IPv6 unicast forwarding table entries.
ECMP Next Hops The maximum number of next hops that can be installed in the IPv4 and IPv6
unicast forwarding tables.
IPv4 Multicast Routes The maximum number of IPv4 multicast forwarding table entries.
IPv6 Multicast Routes The maximum number of IPv6 multicast forwarding table entries.
To Next Page
Loading...
