Rohde & Schwarz SMW200A - Page 1040

Remote Control Commands
R&S
®
SMW200A
1025User Manual 1175.6632.02 ─ 16
:SOURce1:BB:PROGress:MCODer?
// 100 (task compleated)
:SOURce1:BB:EUTRa:STATe ON
:BB:PROGress:MCODer?
// 67 (task in progress)
:SOURce1:BB:EUTRa:WAVeform:CREate
:SOURce1:BB:PROGress:MCODer?
// 25 (task in progress)
// :SOURce1:BB:PROGress:MCODer:DM:FILTer?
// 100
[:SOURce<hw>]:BB:PROGress:MCODer?......................................................................1025
[:SOURce<hw>]:BB:PROGress:MCODer:ARBitrary:MCARrier?........................................1025
[:SOURce<hw>]:BB:PROGress:MCODer:ARBitrary:WSEGment?.....................................1025
[:SOURce<hw>]:BB:PROGress:MCODer:DM:FILTer?..................................................... 1025
[:SOURce<hw>]:BB:PROGress:MCODer?
[:SOURce<hw>]:BB:PROGress:MCODer:ARBitrary:MCARrier?
[:SOURce<hw>]:BB:PROGress:MCODer:ARBitrary:WSEGment?
Queries the status of an initiated process, like for example the calculation of a signal in
accordance to a digital standard, or the calculation of a multi-carrier or multi-segment
waveform file.
Return values:
<WSegment> integer
Indicates the task progress in percent
Range: 0 to 100
*RST: 100
Example: See Example "Querying the status of the Create Waveform file
process" on page 1024
Usage: Query only
[:SOURce<hw>]:BB:PROGress:MCODer:DM:FILTer?
Queries the status of an applied offline filtering, like for example during the calculation
of a waveform and a multi carrier waveform file.
Return values:
<Filter> integer
Indicates the task progress in percent
Range: 0 to 100
*RST: 100
Example: see Example "Querying the status of the Create Waveform file
process" on page 1024
Usage: Query only
SOURce Subsystem