Getting Started
R&S
®
SMW200A
98User Manual 1175.6632.02 ─ 16
The following examples do not cover all possible cases but aim to introduce the way
the block diagram depicts the installed options.
●
An example of a base unit, equipped with one signal path (R&S SMW-B10,
R&S SMW-B13, and R&S SMW-B103/-B106)
●
Two examples of a fully equipped (standard baseband) instrument.
The first one shows the default instrument state and the second one - an advanced
configuration with more abstract representation.
– In this "classic" representation, the block diagram displays all blocks for that the
required hardware and software options are fitted. The block diagram shows
the signal flow as it is.
Figure 2-15: Block diagram of a fully equipped two path instrument (default)
– The block diagram depicting a 4x4 MIMO scenario with coupled baseband
sources is a more abstract representation. Each stage of the signal generation
is still represented by a functional block but the signal routing is displayed in a
conceptional manner.
System Overview
To Next Page
Loading...
