Rohde & Schwarz SMW200A - Page 1151

Remote Control Commands
R&S
®
SMW200A
1136User Manual 1175.6632.02 ─ 16
:SYSTem:VERSion?
Queries the SCPI version the instrument's command set complies with.
Return values:
<Version> string
Example:
SYST:VERS
queries the SCPI version.
Response: "1996"
The instrument complies with the SCPI version from 1996.
Usage: Query only
:SYSTem:OSYStem?
Queries the operating system of the instrument.
Return values:
<OperSystem> string
Example:
SYSTem:OSYStem?
Response: "Linux"
Usage: Query only
:SYSTem:MMEMory:PATH:USER?
Queries the user directory, that means the directory the R&S SMW stores user files on.
Return values:
<PathUser> string
Example:
SYSTem:MMEMory:PATH:USER?
Response: "'/var/user/"
Usage: Query only
:SYSTem:DFPR?
Queries the device footprint of the instrument. The retrieved information is in machine-
readable form suitable for automatic further processing.
If you are obtaining technical support as described in Chapter 15.6, "Collecting Infor-
mation for Technical Support", on page 1177, this information is automatically
retrieved and is part of the created *.tar.gz support file.
Return values:
<DeviceFootprint> string
Information on the instrument type and details on the installed
FW version, hardware and software options.
Example:
:SYSTem:DFPR?
Usage: Query only
SYSTem Subsystem