Elements and Controls of the Graphical User Interface
R&S
®
SMW200A
1240User Manual 1175.6632.02 ─ 16
Example: Naming conventions in multi-entity advanced mode
The name of the "AWGN" functional block and the name of the "AWGN Settings" dia-
log (see Figure D-3) is formed as follows:
"<AWGN> + <Entity 1> = <AWGN 1>"
Figure D-3: Explanation of the naming convention for a multi-entity mode
1 = dialog refers to "Baseband D"
2a-2d = confirms the configuration of the streams corresponding to the same baseband in one dialog
3 = functional blocks and dialog refer to "Entity 1".
4 = functional blocks refer to "Entity 2"
Refer to Chapter D, "Elements and Controls of the Graphical User Interface",
on page 1223 for comprehensive description on the way the R&S SMW displays infor-
mation on its screen.
Naming Conventions in the User Interface
To Next Page
Loading...
