General Instrument Functions
R&S
®
SMW200A
693User Manual 1175.6632.02 ─ 16
Enable LAN Services individually
Enables or disables the following interface services individually.
"SCPI over LAN"
Activates access over LAN to control the instrument remotely, by
using SCPI (Standard Commands for Programmable Instruments)
commands.
See also "Starting a remote control session over LAN with R&S VISA"
on page 737.
"VNC"
Activates access via VNC (Virtual Network Computing) interface, a
graphical desktop sharing system that uses RFB protocol to control
the instrument remotely.
See also Chapter 12.17, "How to Set Up Remote Operation via VNC",
on page 757.
"SSH"
Activates access via SSH (Secure Shell), a network protocol for
secure data communication.
"HTTP"
Activates access via HTTP (Hyper Text Transfer Protocol), the appli-
cation protocol for hypermedia information systems.
"FTP"
Activates access via FTP (File Transfer Protocol), used to transfer
files from a host to the instrument and vice versa.
See also Chapter 10.9.2, "Accessing the File System of the
R&S SMW via ftp", on page 646.
"SMB (Samba)"
Activates access to SMB (Server Message Block), used for providing
shared access to files, printers and serial ports of a network.
See also Chapter 10.9.3, "Accessing the R&S SMW File System via
SMB (Samba)", on page 648.
"Avahi (Zeroconf)"
Activates Avahi, a service for automatic configuration of the instru-
ment in a network environment.
"Software Update"
Allows updating the software.
Security Password
Enters the password that is required to enable or to disable the settings protected by a
security password. Default is 123456.
Note:
●
We recommend that you change the default security password before connecting
the instrument to the network.
●
The security settings are not assigned until you select the "Accept" button.
Accept
Applies the modified settings, provided the security password is entered and correct.
Managing the Security Settings
To Next Page
Loading...
