General Instrument Functions
R&S
®
SMW200A
695User Manual 1175.6632.02 ─ 16
A new password does not take effect until you confirm it with the corresponding
"Change Password" button.
To confirm the new password, always press:
●
"User Password" > Change Password
Or
●
"Security Password" > Change Password
User Name
Indicates the user name used for access to the Linux operating system and valid for
VNC, FTP and SMB (Samba) access.
User Password
Allows you to change and confirm the user password.
Old Password ← User Password
Enters the current user password. The default password is "instrument".
Note: We recommend that you change the default password before connecting the
instrument to a network.
New Password ← User Password
Enters the new user password.
The security password can contain decimal characters only.
Confirm Password ← User Password
Confirms the new user password by repeating.
Note: The new password is not assigned until you select the Change Password button.
Change Password ← User Password
Changes the user password accordingly.
Security Password
Enables you to change and confirm the security password.
Old Password ← Security Password
Enters the currently used security password. The default password is '123456'.
Note: We recommend that you change the default password before connecting the
instrument to a network.
The security password is required when changing the status of the USB and LAN inter-
face.
New Password ← Security Password
Enters the new security password.
The security password can contain decimal characters only.
Confirm Password ← Security Password
Confirms the new security password by repeating.
Managing the Security Settings
To Next Page
Loading...
