Rohde & Schwarz SMW200A - Page 947

Remote Control Commands
R&S
®
SMW200A
932User Manual 1175.6632.02 ─ 16
[:SOURce<hw>]:BB:ARBitrary:WAVeform:CATalog:LENGth?
Reads out the files with extension *.wv in the default directory and returns the number
of waveform files in this directory. The default directory is set using command
MMEM:CDIRectory.
Return values:
<Length> integer
Number of waveform files in default directory
Range: 0 to INT_MAX
*RST: 0
Example: see Example "Managing waveform files" on page 920
Usage: Query only
[:SOURce<hw>]:BB:ARBitrary:WAVeform:SELect
<Filename>
Selects an existing waveform file, i.e. file with extension *.wv.
Parameters:
<Filename> string
Example: See Example "Managing waveform files" on page 920
Manual operation: See "Load Waveform/File" on page 308
[:SOURce<hw>]:BB:ARBitrary:WAVeform:DELete <Filename>
Deletes the specified waveform file. If the file is not on the default path, the path must
be specified at the same time. The file extension may be omitted. Only files with the file
extension *.wv are deleted.
Setting parameters:
<Filename> string
Example: See Example "Managing waveform files" on page 920
Usage: Setting only
[:SOURce<hw>]:BB:ARBitrary:WAVeform:FREE?
Queries the free disk space on the default path of the instrument's hard disk.
Return values:
<Free> integer
Range: 0 to INT_MAX
*RST: 1
Example: See Example "Managing waveform files" on page 920
Usage: Query only
SOURce Subsystem