C613-50055-01 REV A Command Reference for x230 Series Edge Switches 377
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
VLAN COMMANDS
PORT
-VLAN-FORWARDING-PRIORITY
To prioritize Loop Protection over EPSR or MAC Thrashing protection settings, so
that EPSR or MAC Thrashing protection cannot set a port to the forwarding state a
VLAN if Loop Protection has set it to the blocking state, use the commands:
awplus# configure terminal
awplus(config)# port-vlan-forwarding-priority loop-protection
To set EPSR, Loop Protection, and MAC Thrashing protection protocols to have
equal priority for port forwarding and blocking, which allows the protocols to
override each other to set a port to the forwarding or blocking states, use the
commands:
awplus# configure terminal
awplus(config)# port-vlan-forwarding-priority none
To restore the default highest priority protocol back to the default of EPSR, use the
commands:
awplus# configure terminal
awplus(config)# no port-vlan-forwarding-priority
Related
Commands
show port-vlan-forwarding-priority
To Next Page
Loading...
Need help?
General
