Allied Telesis AlliedWare Plus AT-x230-10GP User Manual

560 Command Reference for x230 Series Edge Switches C613-50055-01 REV A
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
IP ADDRESSING AND PROTOCOL COMMANDS
SHOW
IP TRAFFIC
pure ACKs Pure ACKs
pure ACKs predicted Pure ACKs predicted
losses recovered by TCP Reno Losses recovered by TCP Reno
losses recovered by SACK Losses recovered by SACK
SACKs renegged SACKs renegged
detected reordering by FACK Detected reordering by FACK
detected reordering by SACK Detected reordering by SACK
detected reordering by TCP
Reno
Detected reordering by TCP Reno
detected reordering by
sequence
Detected reordering by sequence
full undos Full undos
partial undos Partial undos
SACK undos SACK undos
loss undos Loss undos
segments lost Segments lost
lost retransmits Lost retransmits
TCP Reno failures TCP Reno failures
SACK failures SACK failures
loss failures Loss failures
fast retransmits Fast retransmits
forward retransmits Forward retransmits
retransmits in slow start Retransmits in slow start
timeouts Timeouts
TCP Reno recovery failures TCP Reno recovery failures
SACK recovery failures SACK recovery failures
collapsed segments received Collapsed segments received
DSACKs sent for old packets DSACKs sent for old packets
DSACKs sent for out of order
segments
DSACKs sent for out of order segments
DSACKs received DSACKs received
DSACKs received for out of
order segments
DSACKs received for out of order
segments
connections reset due to
unexpected SYN
Connections reset due to unexpected SYN
Table 15-5: Parameters in the output of the show ip traffic command (cont.)
Parameter Description

Allied Telesis AlliedWare Plus AT-x230-10GP Specifications

General

Brand	Allied Telesis
Model	AlliedWare Plus AT-x230-10GP
Category	Switch
Language	English