C613-50055-01 REV A Command Reference for x230 Series Edge Switches 749
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
IPV4 SOFTWARE ACCESS CONTROL LIST (ACL) COMMANDS
SHOW
DOS INTERFACE
Related
Commands
dos
smurf Displays Enabled when the smurf parameter is configured
with the dos command, plus the action (Shutdown port,
Mirror port, or Trap port) and the number of instances
of any smurf DoS attacks that have occurred on the interface.
Displays Disabled when the smurf parameter is not
configured with the dos command.
synflood Displays Enabled when the synflood parameter is configured
with the dos command, plus the action (Shutdown port,
Mirror port, or Trap port) and the number of instances
of any synflood DoS attacks that have occurred on the
interface.
Displays Disabled when the synflood parameter is not
configured with the dos command.
teardrop Displays Enabled when the teardrop parameter is configured
with the dos command, plus the action (Shutdown port,
Mirror port, or Trap port) and the number of instances
of any teardrop DoS attacks that have occurred on the
interface.
Displays Disabled when the teardrop parameter is not
configured with the dos command.
Table 22-5: Parameters in the show dos interface command output: (cont.)
Type of DoS attack Description
To Next Page
Loading...
Need help?
General
