C613-50055-01 REV A Command Reference for x230 Series Edge Switches 983
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
RADIUS COMMANDS
RADIUS
-SERVER HOST
included in the predefined RADIUS server group radius, which may be used by AAA
authentication, authorization and accounting commands. The client transmits
(and retransmits, according to the retransmit and timeout parameters) RADIUS
authentication or accounting requests to the servers in the order you specify them,
until it gets a response.
Examples To add the RADIUS server 10.0.0.20, use the following commands:
awplus# configure terminal
awplus(config)# radius-server host 10.0.0.20
To set the secret key to allied on the RADIUS server 10.0.0.20, use the following
commands:
awplus# configure terminal
awplus(config)# radius-server host 10.0.0.20 key allied
To delete the RADIUS server 10.0.0.20, use the following commands:
awplus# configure terminal
awplus(config)# no radius-server host 10.0.0.20
To configure rad1.company.com for authentication only, use the following
commands:
awplus# configure terminal
awplus(config)# radius-server host rad1.company.com acct-port 0
To remove the RADIUS server rad1.company.com configured for
authentication only, use the following commands:
awplus# configure terminal
awplus(config)# no radius-server host rad1.company.com
acct-port 0
To configure rad2.company.com for accounting only, use the following
commands:
awplus# configure terminal
awplus(config)# radius-server host rad2.company.com auth-port 0
To configure 192.168.1.1 with authentication port 1000, accounting port 1001 and
retransmit count 5, use the following commands:
awplus# configure terminal
awplus(config)# radius-server host 192.168.1.1 auth-port 1000
acct-port 1001 retransmit 5
Related
Commands
aaa group server
radius-server key
radius-server retransmit
radius-server timeout
show radius statistics
To Next Page
Loading...
Need help?
General
