Network Operation and Remote Control
R&S
®
SMW200A
754User Manual 1175.6632.02 ─ 16
How to create a SCPI list with the current instrument settings in one step
You can also generate the appropriate SCPI list to a manually created instrument state
at any time, in only one step.
To generate a SCPI list with commands for all settings performed:
1. Select "Save/Recall > SCPI Export".
The instrument opens the standard file select dialog, see Chapter 10.4.1, "Save/
Recall Settings", on page 629.
2. In the "Format" entry field, select the source code.
3. Depending on the selected format, convert the script as described in Chap-
ter 12.16, "How to Convert and Save SCPI Lists", on page 756
4. Enter a filename.
5. Select "Export".
The instrument writes all SCPI commands of the key parameters and the modified
settings in the file. The file extension is automatically assigned according to the
source code format.
6. To preview the content of the SCPI list, select SAVE/RCL:
a) "Operation Mode > SCPI-Export"
b) In the /var/user/ directory, select a previously saved file.
How to Record / Create SCPI Lists
To Next Page
Loading...
