Remote Control Commands
R&S
®
SMW200A
835User Manual 1175.6632.02 ─ 16
Parameters:
<Mode> ADVanced | STANdard | REGenerator
ADVanced|STANdard
Switches between the Standard mode and Advanced mode.
REGenerator
Enables the R&S SMW to work as a radar echo generator.
The fading simulator is disabled.
See user manual R&S®SMW-K78 Radar Echo Generation.
*RST: STANdard
Example: see Example "Distributing the I/Q streams to the output connec-
tors (advanced configuration)" on page 826
Options: REGenerator requires option R&S SMW-K78
Manual operation: See "Mode" on page 140
:SCONfiguration:OUTPut:MODE <Mode>
Defines whether an analog and digital or digital only/digital multiplexed signal is gener-
ated.
Parameters:
<Mode> DIGMux | DIGital | ALL
ALL
The generated signal is output at the analog and the digital inter-
faces
DIGital | DIGMux
The generated signal is output as single stream or multiplexed
digital signal at the digital interfaces
*RST: ALL
Example:
SCONfiguration:OUTPut:MODE DIGMux
Options: DIGMux|DIGital require option R&S SMW-K551
Manual operation: See "Signal Outputs" on page 140
:SCONfiguration:FADing <FadConfig>
Defines the signal routing.
SCONfiguration Subsystem
To Next Page
Loading...
