General Configuration Command Set
Configuring Telnet
3-56 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
Command Mode
Read-Write.
Examples
This example shows how to disable inbound and outbound Telnet services:
This example shows how to set the maximum number of outbound Telnet sessions to 3
This example shows how to reset the Telnet port to 23:
Matrix>set telnet disable all
Disconnect all telnet sessions and disable now (y/n)?
[n]: y
All telnet sessions have been terminated, telnet is now disabled.
Matrix>set telnet session outbound 3
Matrix>set telnet port default
To Next Page
Loading...